SAPPHIRE MIRROR

Showing all 4 results

    Catalog No. Description QOH Order
    SCD1888-01A
    SAPPHIRE MIRROR 0.062"DIA.
    1.575mm DIA. X 0.50mm THK.
    more info...

    SCD1888-01A

    DIAMETER: 0.062″+/-.005″
    THICKNESS: 0.0197″+/-.0050″
    SURFACE FINISH: 80-50 PER MIL-O-13830, 2 FACES.
    COATING: PROTECTED ALUMINUM COATING FOR BACK
    SURFACE MIRROR APPLICATION.

    5Register for Pricing
    SCD1975-01A
    SAPPHIRE MIRROR HR 12cm SET
    0.500"DIA. X 2.00mm EDGE THK.
    more info...

    SCD1975-01A

    CONFIGURATION: DISC, PLANO-CONCAVE
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 2.00mm +/- 0.04mm
    WEDGE ANGLE: 3.0 MINUTES +/- 0.2 MINUTES
    ( BEST EFFORT ONLY )
    RADIUS OF CURVATURE (SURFACE 1): 240.00mm CONCAVE
    +/- 4.8mm
    RADIUS OF CURVATURE (SURFACE 2): INFINITE (PLANO)
    TOL.NOT SPECIFIED
    SURFACE ACCURACY: 1/10 WAVE RMS MAXIMUM, 2 FACES.
    SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
    SURFACE ROUGHNESS: 10 ANGSTROMS RMS MAXIMUM,
    2 FACES.
    EDGE BEVELS: 0.005″ NOMINAL X 45deg, 2 PLACES.
    MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
    CRYSTALLOGRAPHIC ORIENTATION: (0001)
    COATING: SEE SPECIFICATION SCD1975 Rev.A

    2Register for Pricing
    SCD1978-01A
    SAPPHIRE MIRROR HR 15cm SET
    0.500"DIA. X 2.00mm EDGE THK.
    more info...

    SCD1978-01A

    CONFIGURATION: DISC, PLANO-CONCAVE
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 2.00mm +/- 0.04mm
    WEDGE ANGLE: 3.0 MINUTES +/- 0.2 MINUTES
    ( BEST EFFORT ONLY )
    RADIUS OF CURVATURE (SURFACE 1): 300.00mm CONCAVE
    +/- 6.0mm
    RADIUS OF CURVATURE (SURFACE 2): INFINITE (PLANO)
    TOL.NOT SPECIFIED
    SURFACE ACCURACY: 1/10 WAVE RMS MAXIMUM, 2 FACES.
    SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
    SURFACE ROUGHNESS: 10 ANGSTROMS RMS MAXIMUM,
    2 FACES.
    EDGE BEVELS: 0.005″ NOMINAL X 45deg, 2 PLACES.
    MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
    CRYSTALLOGRAPHIC ORIENTATION: (0001)
    COATING: SEE SPECIFICATION SCD1978 Rev.A

    2Register for Pricing
    SCD2396-01A
    SAPPHIRE MIRROR SIGNAL-AMP5
    1.000" X 0.590" X 0.160"THK.
    more info...

    SCD2396-01A

    CONFIGURATION: PLATE, PLANE-PARALLEL
    LENGTH: 1.000″+/-.010″
    WIDTH: 0.590″+/-.010″
    THICKNESS: 0.160″+/-.010″
    PARALLELISM: NOT SPECIFIED.
    EDGE BEVELS: 0.060″+/-.010″ X 45deg, 1 PLACE.
    ALONG ONE OF THE 1.000″ LONG EDGES,
    ON THE FINE GROUND FACE. (SEE DWG).
    0.007″ NOMINAL X 45deg, ALL OTHER
    EDGES.
    SURFACE FINISH: 10-5 PER MIL-PRF-13830, ONE FACE.
    FINE GROUND ALL OTHER FACES.
    SURFACE ACCURACY: 1/4 RMS MAXIMUM, POLISHED FACE.
    MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
    CRYSTALLOGRAPHIC ORIENTATION: (0001).
    COATING: REFLECTIVE MIRROR COAT FOR > 99.7%
    REFLECTANCE AT 1.03 MICRONS WITH A 32
    DEGREE INCIDENCE ANGLE, APPLIED TO
    POLISHED FACE. SEE DWG FOR COATED AREA.

    7Register for Pricing