SAPPHIRE LIGHT

Showing all 2 results

    Catalog No. Description QOH Order
    SCD3151-02B
    SAPPHIRE LIGHT GUIDE TOP
    0.405" X 0.079" X 7.874"LONG
    more info...

    SCD3151-02B

    CONFIGURATION: RECT.PLATE, STEPPED FACE.
    OVERALL LENGTH: 7.874″+/-.001″
    OVERALL WIDTH: 0.405″+/-.002″
    STEPPED WIDTH: 0.248″+/-.001″
    STEP HEIGHT: 0.030″ REF.ONLY.
    OVERALL THICKNESS: 0.079″+/-.002″
    LEDGE THICKNESS: 0.049″+/-.002″
    PARALLELISM: 0.002″ MAXIMUM T.I.R.
    FLATNESS: 0.0005″ SUPPORTED / 0.0050″ UNSUPPORTED.
    SURFACE FINISH: 20-10 PER MIL-PRF-13830, STEPPED
    (5 ANGSTROMS FACE ONLY. ALL OTHER SURFACES
    RMS MAXIMUM) FINE GROUND.
    EDGE CHIPS: 0.005″ MAXIMUM ALONG THE CRITICAL
    STEP FACE EDGES. NO BEVEL ALLOWED.
    EDGE BEVELS: 0.010″+/-.002″ X 45deg, WHERE SHOWN
    ON DRAWING.
    MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
    CRYSTALLOGRAPHIC ORIENTATION: (0001).
    COATING: NONE, NOT REQUIRED.

    0Register for Pricing
    SCD3236-02A
    SAPPHIRE LIGHT GUIDE BOTTOM
    0.405" X 0.104" X 7.756"LONG
    more info...

    SCD3236-02A

    CONFIGURATION: RECT.PLATE, WEDGED STEPPED FACE.
    OVERALL LENGTH: 7.756″+/-.001″
    OVERALL WIDTH: 0.405″+/-.002″
    STEPPED WIDTH: 0.248″+/-.001″
    STEP HEIGHT: 0.055″ REF.ONLY (HIGH SIDE OF WEDGE)
    OVERALL THICKNESS: 0.104″+/-.002″ (HIGH SIDE)
    LEDGE THICKNESS: 0.049″+/-.002″
    WEDGE ANGLE: 5.89 DEGREES +/- 1/4 DEGREE
    FLATNESS: 0.0005″ SUPPORTED / 0.0050″ UNSUPPORTED.
    SURFACE FINISH: 20-10 PER MIL-PRF-13830, STEPPED
    (5 ANGSTROMS FACE ONLY. ALL OTHER SURFACES
    RMS MAXIMUM) FINE GROUND.
    EDGE CHIPS: 0.005″ MAXIMUM ALONG THE CRITICAL
    STEP FACE EDGES. NO BEVEL ALLOWED.
    EDGE BEVELS: 0.010″+/-.002″ X 45deg, WHERE SHOWN
    ON DRAWING.
    MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
    CRYSTALLOGRAPHIC ORIENTATION: (0001).
    COATING: NONE, NOT REQUIRED.

    4Register for Pricing